[Back to SGI Tech Advice Index]
Ian's...
Ref PSU Clock L2 RAM Banks Disk GFX No. Cost No. Type CPU Speed (MB) (MB) Used Size/RPM Type GEs Z? (UKP) 1 R4K R4400SC 150 1 384 3 73GB/15K Elan 4 Y 565 (1" disk) 2 R4K R4400SC 150 1 256 2 73GB/15K Elan 4 Y 505 (1" disk) 3 R4K R4400SC 150 1 128 1 73GB/15K Elan 4 Y 445 (1" disk) 4 R4K R4400SC 150 1 128 1 73GB/10K Elan 4 Y 435 (1" disk) 5 R4K R4400SC 150 1 128 1 73GB/10K Elan 4 Y 420 (1.6" disk) 6 R4K R4400SC 150 1 128 1 36GB/15K Elan 4 Y 420 7 R4K R4400SC 150 1 64 2 36GB/15K Elan 4 Y 370 8 R4K R4400SC 150 1 64 2 36GB/15K Entry 0 N 325 9 R4K R4000SC 100 1 64 2 36GB/15K Elan 4 Y 345 10 R4K R4000SC 100 1 64 2 36GB/15K XZ 2 Y 335 11 R4K R4000SC 100 1 64 2 36GB/15K XS24Z 1 Y 330 12 R4K R4000SC 100 1 64 2 36GB/15K XS24 4 N 325 13 R4K R4000SC 100 1 64 2 36GB/15K XS24 2 N 315 14 R4K R4000SC 100 1 128 1 36GB/15K XS24 1 N 365 15 R4K R4000SC 100 1 128 2 36GB/15K XS24 1 N 335 16 R4K R4000SC 100 1 64 1 36GB/15K XS24 1 N 320 17 R4K R4400SC 100 1 64 2 36GB/15K XS24 1 N 315 18 R4K R4000SC 100 1 64 2 36GB/15K XS24 1 N 310 19 R4K R4000SC 100 1 64 2 36GB/15K XS8 1 N 300 20 R4K R4000SC 100 1 64 2 36GB/15K Entry 0 N 300 21 R3K R3000 33 - 96 3 36GB/15K Elan 4 Y 415 22 R3K R3000 33 - 64 2 36GB/15K Elan 4 Y 365 23 R3K R3000 33 - 32 1 36GB/15K Elan 4 Y 315 24 R3K R3000 33 - 32 3 36GB/15K Elan 4 Y 285 25 R3K R3000 33 - 32 3 36GB/15K XZ 2 Y 275 26 R3K R3000 33 - 32 3 36GB/15K XS24Z 1 Y 270 27 R3K R3000 33 - 32 3 36GB/15K XS24 4 N 265 28 R3K R3000 33 - 32 3 36GB/15K XS24 2 N 255 29 R3K R3000 33 - 32 1 36GB/15K XS24 1 N 280 30 R3K R3000 33 - 32 3 36GB/15K XS24 1 N 250 31 R4K R3000 33 - 32 3 36GB/15K XS24 1 N 260 (upgradeable to R4K) 32 R3K R3000 33 - 32 3 36GB/15K XS8 1 N 240 33 R3K R3000 33 - 32 3 36GB/15K Entry 0 N 240 Add 125 to change to a mint condition Entry graphics + SVIDEO board set (CDs and manuals included). Add 35 to include a keyboard (connecting cable not included). Add 15 to include a connecting cable for keyboard. Add 15 to include a biege mouse : 15 UKP (SGI PN 9150800. Can also be used with Onyx systems) Add 15 to include a front door plate with both catches intact. Add 10 to include a front door plate with 1 intact catch. Add 5 to include a front door plate that has both catches broken (hangs loose). Add 10 to include an R4000/Elan badge. For a full list of available upgrades/extras, please see the Parts/Spares page. The above specs are not fixed; email me for alternative configurations and prices. WARRANTY | <---------- System Type ------------> TABLE | R3000, R4000, R4400/100 | R4400/150 ------------------------------------------------------------------------ Default cover | 30 days | 60 days Extend to 90 days | +100 | +50 Extend to 6 months | +250 | +150 Extend to 1 year | +500 | +350 Disk upgrade/downgrade options are as follows (old disk along the top, new disk down the side on the left), eg. to upgrade from a 36GB 15K to a 146GB 10K, add 50. Old Disk -> RPM: | 15K | 10K | 15K | 10K | 15K | 10K Capacity: | 36GB | 73GB | 73GB | 146GB | 146GB | 300GB ----------------------------------------------------------------------- New 73GB 10K | 15 | - | - | - | - | - Disk 73GB 15K | 30 | 15 | - | - | - | - | 147GB 10K | 50 | 35 | 20 | - | - | - | 147GB 15K | 70 | 55 | 40 | 20 | - | - \|/ 300GB 10K | 170 | 155 | 140 | 120 | 100 | - 300GB 15K | 250 | 235 | 220 | 200 | 180 | 80 For an extra disk with sled, select the required SCA disk from the SCSI Disks Table and add 30, eg. an extra 1" 15K 36GB Fujitsu (Worldisk) MAX3036NC on a sled would be +55 (note that this 36GB 15K drive is the fastest SCA disk I've ever tested). IRIS Indigo can have three internal disks.
By default, none of the systems above come with keyboard or mouse (these
are priced separately). Also, none of them have front door flaps (they do
of course have the main front panel though); door flaps are available
eparately aswell. All systems have a few scratches, though better condition
cases are be available on request.
All systems use an SCA disk with a combo 50/68/80pin SCSI adapter. I can fit lesser drives if preferred, but the cost would be higher.
R3K systems normally have IRIX 5.3 with XFS installed; R4K systems have IRIX 6.5.22m installed, though I can install 6.2 instead if preferred, and will do so if the RAM is 64MB or less. R4K systems with 6.5.22m have the same full installation I do for Indy or Indigo2 systems, eg. a typical installed software list in swmgr would look much like this. For R3K systems, I've also spent a lot of time constructing a good installation with as much software installed as possible. Media is not included, but I can supply a CDR set for extra (email for details).
See the shipping costs page for details of postage charges to the UK, mainland Europe and beyond. For UK destinations, a typical cost would be 12.50 UKP by PF48, while for the USA it would be about 85 UKP. Alternatively, a personal collection is also welcome (I live in Edinburgh).
Note that Entry graphics has a max resolution of 1024x768 with 8bit colour and is no good for 3D tasks, but it does at least have both types of monitor output socket (SGI 13W3, plus the PC-type HD15). Also be aware that XS systems without a Z buffer board may not be able to run certain 3D applications (certainly some standard SGI demos cannot run if the Z board is not present).
I've spent a lot of time reorganising these Indigos, taking them completely apart, down to the bare chassis, for a thorough cleaning, but also moving parts around so that functional components are in the better-condition chassi, creating good disk installations (eg. 5.3 with applications, IDO, patches, XFS update, freeware, etc.) Thus, although keyboards and mice are not included by default, these systems have at least been properly sorted for resale; you won't find better!
