Onyx deskside, quad-R10K/195MHz (2MB), 2GB RAM, RE2 (1RM5), IRIX 6.5.22m.

Tested: 02/Apr/2023

CPU Board at Slot 2: (Enabled)
  Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 1 at Slot 2/Slice 1: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 2 at Slot 2/Slice 2: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
  Processor 3 at Slot 2/Slice 3: 194 Mhz R10000 with 2 MB secondary cache (Enabled)
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Main memory size: 2048 Mbytes, 2-way interleaved
MC3 Memory Board at Slot 1: 2048 MB of memory (Enabled)
  Bank A contains 64 MB SIMMS (Enabled)
  Bank B contains 64 MB SIMMS (Enabled)
  Bank C contains 64 MB SIMMS (Enabled)
  Bank D contains 64 MB SIMMS (Enabled)
  Bank E contains 64 MB SIMMS (Enabled)
  Bank F contains 64 MB SIMMS (Enabled)
  Bank G contains 64 MB SIMMS (Enabled)
  Bank H contains 64 MB SIMMS (Enabled)
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 3
RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip rev 2)
Integral Ethernet controller: et0, Ebus slot 3
I/O board, Ebus slot 3: IO4 revision 1
VME bus: adapter 13
VME bus: adapter 0 mapped to adapter 13
EPC external interrupts

Graphics board 0 is "RES" graphics.
	Managed (":0.0") 1280x1024 
	Display 1280x1024 @ 60Hz
	12 GE (GE10 rev. 0x7)
	1 RM5 board
	Small pixel depth
	10-bit RGBA pixels
	Not using Multi-Channel Option