Onyx deskside, Quad-R4K/200MHz (4MB), RE2 (1RM5), 6.5.22m. System disk: Seagate 300GB 15K ST3300655LC (connected via SE bus). Unlike when I tested this type of CPU board back in 2008 (hinv014.txt), this time the system has 2-way interleaving for the RAM, which or may not make a difference. I have a 2nd RM5, will check later if it's ok. CPU Board at Slot 2: (Enabled) Processor 0 at Slot 2/Slice 0: 200 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 1 at Slot 2/Slice 1: 200 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 2 at Slot 2/Slice 2: 200 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 3 at Slot 2/Slice 3: 200 Mhz R4400 with 4 MB secondary cache (Enabled) CPU: MIPS R4400 Processor Chip Revision: 6.0 FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0 Main memory size: 2048 Mbytes, 2-way interleaved MC3 Memory Board at Slot 1: 2048 MB of memory (Enabled) Bank A contains 64 MB SIMMS (Enabled) Bank B contains 64 MB SIMMS (Enabled) Bank C contains 64 MB SIMMS (Enabled) Bank D contains 64 MB SIMMS (Enabled) Bank E contains 64 MB SIMMS (Enabled) Bank F contains 64 MB SIMMS (Enabled) Bank G contains 64 MB SIMMS (Enabled) Bank H contains 64 MB SIMMS (Enabled) Instruction cache size: 16 Kbytes Data cache size: 16 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Integral SCSI controller 0: Version WD33C95A, single ended, revision 0 Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 2 on SCSI controller 0 (unit 2) Integral SCSI controller 1: Version WD33C95A, differential, revision 0 Integral EPC serial ports: 4 Integral EPC parallel port: Ebus slot 3 RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip rev 2) Integral Ethernet controller: et0, Ebus slot 3 I/O board, Ebus slot 3: IO4 revision 1 VME bus: adapter 13 VME bus: adapter 0 mapped to adapter 13 EPC external interrupts Graphics board 0 is "REV" graphics. Unmanaged 1280x1024 Display 1280x1024 @ 60Hz 12 GE (GE10 rev. 0x7) 1 RM5 board Small pixel depth 10-bit RGBA pixels Not using Multi-Channel Option