R10K/250 (1MB) O2, 1GB RAM, 36GB 10K disk, 6.5.26m, DIGVID.

CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
1 250 MHZ IP32 Processor
Main memory size: 1024 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV2 Card version 0, Camera not connected.
Vice: TRE

Graphics board 0 is "CRM" graphics.
        Unmanaged 1280x1024 
        32 + 32 bitplanes
        board revision 2, CRM revision C, GBE revision B
         Monitor 0 type: HWP 4819
        Xvc info not available for unmanaged boards