Octane R10K/250 (2MB), 1GB RAM (all banks), 36GB 7200rpm disk, SE/SSE gfx, IRIX 6.5.30.

The CPU used to be a single-300. It now has the core which was once in a dual-250 module,
ie. I used two single-300 cores to make a dual-350 (oc'd from 300), put the single-250s
into the old single-300 modules, thus the 2MB L2 shown here.

NB: this means the first main line of the hinv output is wrong, ie. it's not 300MHz and
the SGI PN is now meaningless.

Location: /hw/node
      PM10300MHZ Board: barcode KGM696     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
            IP30 Board: barcode HMX995     part 030-0887-005 rev  A
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.SR Board: barcode AAB7210435 part 060-0028-003 rev  A
             FP1 Board: barcode 87892B     part 030-0891-003 rev  C
Location: /hw/node/xtalk/12
           MOT20 Board: barcode KGS042     part 030-1240-003 rev  G
Location: /hw/node/xtalk/11
           MOT10 Board: barcode HPA476     part 030-1241-002 rev  G
1 250 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESSI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

# gfxinfo -v
Graphics board 0 is "IMPACTSR" graphics.
        Unmanaged 1280x1024 
        Product ID 0x3, 2 GEs, 2 REs, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H, 
        VC3 rev A, CMAP rev F, Heart rev E
        20" monitor (id 0x3)

        Xvc info not available for unmanaged boards
Graphics board 1 is "IMPACTSR" graphics.
        Unmanaged 1280x1024 
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H, 
        VC3 rev A, CMAP rev E, Heart rev E
        unknown, assuming 19" monitor (id 0xf)

        Xvc info not available for unmanaged boards