Onyx RE2 Rack, 4 x R4K/250 (4MB), 6.5.22m, 1RM4. CPU Board at Slot 5: (Enabled) Processor 0 at Slot 5/Slice 0: 250 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 1 at Slot 5/Slice 1: 250 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 2 at Slot 5/Slice 2: 250 Mhz R4400 with 4 MB secondary cache (Enabled) Processor 3 at Slot 5/Slice 3: 250 Mhz R4400 with 4 MB secondary cache (Enabled) CPU: MIPS R4400 Processor Chip Revision: 6.0 FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0 Main memory size: 2048 Mbytes, 4-way interleaved MC3 Memory Board at Slot 1: 1024 MB of memory (Enabled) Bank A contains 64 MB SIMMS (Enabled) Bank B contains 64 MB SIMMS (Enabled) Bank C contains 64 MB SIMMS (Enabled) Bank D contains 64 MB SIMMS (Enabled) MC3 Memory Board at Slot 2: 1024 MB of memory (Enabled) Bank A contains 64 MB SIMMS (Enabled) Bank B contains 64 MB SIMMS (Enabled) Bank C contains 64 MB SIMMS (Enabled) Bank D contains 64 MB SIMMS (Enabled) Instruction cache size: 16 Kbytes Data cache size: 16 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Integral SCSI controller 0: Version WD33C95A, differential, revision 0 Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 5 on SCSI controller 0 (unit 5) Integral SCSI controller 1: Version WD33C95A, differential, revision 0 Integral SCSI controller 2: Version SCIP/WD33C95A, single ended Integral SCSI controller 3: Version SCIP/WD33C95A, differential Integral SCSI controller 4: Version SCIP/WD33C95A, differential Integral EPC serial ports: 4 Integral EPC parallel port: Ebus slot 11 RealityEngineII Graphics Pipe 0 at IO Slot 11 Physical Adapter 2 (Fchip rev 2) Integral Ethernet controller: et0, Ebus slot 11 I/O board, Ebus slot 11: IO4 revision 1 VME bus: adapter 45 VME bus: adapter 0 mapped to adapter 45 EPC external interrupts Graphics board 0 is "REV" graphics. Managed (":0.0") 1280x1024 Display 1280x1024 @ 72Hz 12 GE (GE10 rev. 0x7) 1 RM4 board Small pixel depth 10-bit RGB pixels Not using Multi-Channel Option