Origin300, 2 x 2-CPU 600MHz bricks, both with 4GB RAM.

Image:

  http://www.sgidepot.co.uk/misc/origin300.jpg

Benchmarks:

  http://www.sgidepot.co.uk/perfcomp.html


# hinv -vm
Location: /hw/module/001c01/node
       IP45_2CPU Board: barcode MRJ812     part 030-1798-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/14
             IO8 Board: barcode MRG045     part 030-1673-004 rev -C
Location: /hw/module/001c01/Ibrick/xtalk/15
             IO8 Board: barcode MRG045     part 030-1673-004 rev -C
Location: /hw/module/001c02/node
       IP45_2CPU Board: barcode MRE449     part 030-1798-001 rev -B
Location: /hw/module/001c02/Ibrick/xtalk/14
             IO8 Board: barcode MPV560     part 030-1673-004 rev -C
Location: /hw/module/001c02/Ibrick/xtalk/15
             IO8 Board: barcode MPV560     part 030-1673-004 rev -C
4 600 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled) 
  Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled) 
  Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 2 at Module 001c02/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled) 
  Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
CPU 3 at Module 001c02/Slot 0/Slice C: 600 Mhz MIPS R14000 Processor Chip (enabled) 
  Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Memory at Module 001c02/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 8: Version QL12160, low voltage differential
Integral SCSI controller 9: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Gigabit Ethernet: eg0, module 001c01, pci_bus 2, pci_slot 1, firmware version 0.0.0
Gigabit Ethernet: eg3, module 001c02, pci_bus 2, pci_slot 2, firmware version 0.0.0
Gigabit Ethernet: eg1, module 001c01, pci_bus 2, pci_slot 2, firmware version 0.0.0
Fast Ethernet: ef2, version 1, module 001c02, pci 4
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
IOC3/IOC4 external interrupts: 3
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
HUB in Module 001c02/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
IP35prom in Module 001c02/Slot n0: Revision 6.210
USB controller: type OHCI
USB controller: type OHCI


# uname -R
6.5 6.5.26m