Origin200 Dual-R12K/360, 1GB RAM, 36GB 10K, 6.5.26m.

Location: /hw/module/1/slot/MotherBoard/node
  PIMM_360_4M_2P Board: barcode MHL448     part 030-1497-001 rev  J
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode HVA102     part 030-1389-001 rev  A
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
2 360 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
CPU 0 at Module 1/Slot 1/Slice A: 360 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 3.5. Scache: Size 4 MB Speed 240 Mhz  Tap 0xb
CPU 1 at Module 1/Slot 1/Slice B: 360 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 3.5. Scache: Size 4 MB Speed 240 Mhz  Tap 0xb
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 1024 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Origin 200 base I/O, module 1 slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156