2 x 90MHz POWER Onyx

2 90 MHZ IP21 Processors
CPU: MIPS R8000 Processor Chip Revision: 3.0
FPU: MIPS R8010 Floating Point Chip Revision: 0.2
Main memory size: 320 Mbytes, 1-way interleaved
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Disk drive: unit 1 on SCSI controller 0
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
  Disk drive: unit 1 on SCSI controller 1
  Disk drive: unit 2 on SCSI controller 1
  Disk drive: unit 3 on SCSI controller 1
  Disk drive: unit 4 on SCSI controller 1
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 3
RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip
rev 2)
XPI FDDI controller: xpi1, slot 3, adapter 5, firmware version
9804292300, SAS
XPI FDDI controller: xpi0, slot 3, adapter 5, firmware version
9804292300, SAS
Integral Ethernet controller: et0, Ebus slot 3
I/O board, Ebus slot 3: IO4 revision 1
Multi-Channel Option board installed
VME bus: adapter 13
VME bus: adapter 0 mapped to adapter 13
EPC external interrupts

gfxinfo:

Graphics board 0 is "RET" graphics.
        Managed (":0.0") 1280x1024
        Display 1280x1024 @ 72Hz
        12 GE (GE10 rev. 0x7)
        2 RM5 boards
        Medium pixel depth
        10-bit RGBA pixels
        Not using Multi-Channel Option